Refinishing gives an old bathtub a new surface. Replacement removes the tub and installs a new one. The right choice depends less on how the tub looks and more on what is wrong with it.
Quick answer: Refinish a tub that is structurally sound but stained, dull or dated — especially cast iron. Replace a tub that leaks, flexes underfoot, has rust holes, sits in a failing surround, or simply doesn't work for the people using the bathroom anymore.
At Century City Baths, we've been working in Chicagoland homes long enough to know that the honest recommendation isn't always the bigger job. Below is how we walk homeowners through the decision.
What Refinishing Actually Is
Bathtub refinishing — sometimes called reglazing or resurfacing — is a surface treatment, not a structural repair. The process generally looks like this:
- Deep cleaning and stripping. Years of soap scum, body oils, caulk residue and old coatings come off.
- Etching. The existing porcelain or fiberglass is chemically etched so the new coating has something to grab.
- Repair. Chips, small cracks and worn spots are filled and sanded smooth.
- Masking and ventilation. Fixtures, tile and floors get protected; proper airflow is set up.
- Coating. Primer followed by several layers of an acrylic urethane or epoxy-based finish, sprayed on.
- Cure time. Typically 24 to 48 hours before the tub can be used.
Done properly, the result is a smooth, uniform, glossy surface that looks genuinely new. Done poorly — and there is a lot of poorly done refinishing out there — it peels within a year.
What refinishing costs and how long it lasts
In the Chicago area, professional refinishing generally runs a fraction of what a full replacement costs, and the job is usually done in a single day with the tub back in service within two. A quality refinish, maintained with non-abrasive cleaners, commonly lasts 10 to 15 years. Cheap work can fail in 12 to 24 months.
The variable isn't the product nearly as much as the prep. Surface preparation is where corners get cut, and it's the only reason most refinishing jobs fail.
What Replacement Actually Involves
Replacement is a demolition and reconstruction project. Depending on your home, it includes:
- Removing the old tub (cast iron tubs often have to be broken apart in place)
- Opening the wall to access plumbing
- Potentially replacing the drain, overflow, supply lines and valve body
- Addressing any water damage, rotted subfloor or compromised framing discovered behind the tub
- Setting and leveling the new tub
- Rebuilding the surround — tile, panels or a one-piece unit
- Finish work: trim, caulk, paint, new fixtures
In a typical Chicagoland bathroom, this is a three-to-seven-day project, sometimes longer if the bathroom is the only one in the house and you need staged work.
It costs significantly more than refinishing. It also solves problems refinishing can't touch, and it's the only route if you want a different size, shape, depth or configuration.
When Refinishing Is the Right Call
Your tub is cast iron
This is the single biggest factor. Older Chicago bungalows, two-flats, greystones and vintage apartments are full of cast iron tubs that are, structurally, better than almost anything manufactured today. They're heavy, rigid, hold heat beautifully, and they'll outlive the house if the surface is maintained.
Replacing a cast iron tub also means getting it out of a second-floor bathroom in a 1920s building with a narrow stair turn. That's not impossible, but it adds real cost and risk. If the tub is sound, refinish it.
The problem is cosmetic
Staining, dullness, surface scratches, a color that screams 1978 — these are finish problems, not tub problems. An avocado green or harvest gold tub in otherwise good shape is a textbook refinishing candidate.
The surrounding tile is in good condition
If you have original tile work that's intact and attractive, replacing the tub almost always means damaging or losing some of it. Refinishing lets you keep it. We can also refinish tile surrounds to match or coordinate with the tub.
You're preparing to sell
If you need the bathroom to show well and you're not looking to recoup a major renovation, refinishing delivers a dramatic visual improvement for a modest investment. Buyers notice a clean, bright, white tub. They don't know whether it's new or refinished.
You're a landlord or property manager
Turnover timelines matter. A refinish gets a unit rent-ready in two days instead of two weeks, at a fraction of the cost. For buildings with multiple identical bathrooms, this adds up fast.
Budget or timeline is the binding constraint
Sometimes the right answer is the one you can actually do. A refinished tub now beats a perfect renovation three years from now.
When Replacement Is the Right Call
The tub leaks
A leak means water is going somewhere it shouldn't — into the floor, the ceiling below, the wall cavity. Refinishing coats the surface; it does nothing for a cracked drain seat, a failed overflow gasket, or a hairline fracture that runs through the tub body. If there's active water intrusion, open it up and fix it right.
The tub flexes when you stand in it
Soft spots underfoot usually mean a fiberglass or acrylic tub has lost its support — either the mortar bed has crumbled or the tub was never properly bedded. Flex eventually cracks the surface, and it will crack a refinish too. This needs to be addressed structurally.
There's rust through the metal
Surface rust on a steel or cast iron tub can be ground out and repaired. Rust that has eaten through the material cannot. Once you have perforation, the tub is finished.
The surround is failing
If tile is loose, grout is crumbling, there's visible mold behind the wall, or the backer board is soft, you have a wall problem that's going to require demolition regardless. At that point, replacing the tub while the wall is open is often the economical choice.
You need a different fixture
Refinishing can't make a tub deeper, wider, or a different shape. If you want to convert a tub to a walk-in shower, install a soaking tub, add a seat, or create a curbless, accessible entry, that's a replacement project.
Accessibility has changed
This comes up constantly with Chicagoland homeowners planning to age in place. A 16-inch-tall tub wall becomes a genuine hazard. Walk-in tubs, low-threshold showers and barrier-free conversions are all replacement work — and they're among the most valuable changes you can make to a home you plan to stay in.
The tub has already been refinished once
Refinishing over an existing refinish is possible but less reliable. If a previous coating is peeling, bubbling or failing in patches, the adhesion problem underneath doesn't go away. Sometimes a full strip and redo works. Often it's a sign the tub has reached the end of its practical life.
The Middle Ground Most People Don't Know About
The conversation isn't always binary. A few options sit between refinishing and full replacement:
Tub liners. An acrylic shell custom-molded to fit over your existing tub. Faster than replacement, no demolition. The downside: if water gets between the liner and the original tub, you've created a hidden moisture problem. We're selective about when we recommend these.
Spot repair. A single chip or a localized crack doesn't always require refinishing the whole tub. Color-matched repairs can be nearly invisible.
Refinish now, replace later. If you know a gut renovation is coming in four years but can't live with the bathroom today, a refinish is a legitimate bridge.
Tub-to-shower conversion. For households that never use the tub, converting the space into a shower often costs less than a full tub replacement and uses the space far better.
A Practical Decision Framework
Ask these in order:
- Does it leak or flex? → Replace.
- Is there rust-through or a structural crack? → Replace.
- Is the surround failing? → Likely replace.
- Do I need a different size, depth, or an accessible entry? → Replace.
- Is it cast iron and structurally sound? → Strongly consider refinishing.
- Is my only complaint how it looks? → Refinish.
- Am I selling within two years? → Refinish.
- Is this my forever home and I want it exactly right? → Replace.
If you answered yes to one of the first four, the decision is essentially made for you. If you only hit the last four, refinishing is probably the smarter use of your money.
Chicagoland-Specific Considerations
A few things that come up more here than elsewhere:
Vintage housing stock. Pre-war buildings throughout the city and the older suburbs have cast iron tubs worth preserving and plumbing worth not disturbing unnecessarily. Opening a wall in a 1915 two-flat sometimes reveals galvanized supply lines or a cast iron waste stack that then becomes part of the project.
Hard water. Chicago-area water leaves mineral deposits that etch and dull tub surfaces over time. This is a maintenance issue, not a structural one, and it's exactly what refinishing addresses well. After a refinish, switching to a non-abrasive cleaner makes a real difference in how long the finish holds.
Condo and HOA rules. Many buildings restrict work hours, require certificates of insurance, and have specific rules about plumbing modifications. Refinishing generally sails through approval. Replacement usually requires paperwork and sometimes a permit. Worth checking before you plan.
Second-floor bathrooms with tight access. Getting a 350-pound cast iron tub down a narrow Chicago stairway is a real logistical cost that doesn't show up in online price estimates.
Ventilation during refinishing. Refinishing coatings require proper ventilation. In winter, that means we plan the job carefully — adequate airflow matters more than convenience, and we don't cut corners on it.
Questions to Ask Any Contractor
Whether you're getting quotes for refinishing or replacement:
- What specifically is wrong with my tub, and how did you determine that?
- What's your prep process? (For refinishing, this is the question that matters most.)
- What warranty do you offer, and what voids it?
- How long until I can use the tub?
- What happens if you find water damage or rot behind the wall?
- Are you licensed and insured for work in my municipality?
- Can you show me recent work on a tub like mine?
A contractor who recommends replacement without examining whether the tub is structurally sound isn't giving you an assessment — they're giving you a sales pitch.
How We Approach It at Century City Baths
We do both. That's deliberate, and it's why we can give you a straight answer.
Our process starts with an actual inspection — not a phone estimate. We look at the tub material, check for flex and leaks, evaluate the drain and overflow, assess the surround, and ask what you're actually trying to accomplish. Then we tell you what we'd do if it were our bathroom.
Sometimes that's a one-day refinish that saves you thousands. Sometimes it's a full replacement because the tub is past saving and we'd rather tell you that now than refinish a tub that fails in a year. We've talked plenty of homeowners out of the bigger job, and we've told plenty of others that refinishing would be throwing good money after bad.
We serve homeowners, landlords and property managers throughout Chicago and the surrounding suburbs, and we stand behind the work either way.
The Bottom Line
Refinishing is the right answer more often than most homeowners assume — particularly in Chicagoland, where so many homes have cast iron tubs that are structurally excellent and only cosmetically tired. If your tub is sound and your complaint is how it looks, refinishing delivers most of the visual benefit for a small share of the cost and disruption.
Replacement is the right answer when the tub has an actual structural or functional problem, when the surrounding wall is compromised, or when the bathroom no longer fits the people using it. In those cases, refinishing is a temporary cover over a problem that's still growing.
The deciding question isn't "which is cheaper." It's "what's actually wrong here." Answer that honestly and the right choice is usually obvious.
Not sure which category your tub falls into? Reach out to Century City Baths for an honest assessment. We'll look at it, tell you what we see, and let you decide from there.