Apartment Remodeling Guide: A Step-by-Step Renovation

Renovating a condo, co-op, or apartment in the Chicagoland area comes down to seven main steps: defining your scope and budget, reviewing your building's rules, hiring the right professionals, determining permit requirements, securing approvals, preparing for construction, and managing the work through completion.

At Century City Baths, we've spent years guiding homeowners through remodels in high-rises along Lake Shore Drive, vintage walk-ups in Lincoln Park and Logan Square, mid-century condos in Skokie and Oak Park, and townhomes throughout the collar counties. Along the way, we've learned that the projects that go smoothly aren't necessarily the ones with the biggest budgets—they're the ones where the homeowner understood the process before the first demo day.

Here's the roadmap we share with every client.

Step 1: Define Your Scope and Set a Realistic Budget

Before you look at a single tile sample, get clear on what you're actually trying to accomplish.

Start with the "why." Are you updating a tired 1980s bathroom with a builder-grade tub surround? Converting a cramped tub into a curbless walk-in shower for aging in place? Reconfiguring a galley kitchen? Doing a full gut of a unit you just purchased? The answer shapes everything downstream—including whether you'll need permits, how long you'll be displaced, and how much your building will get involved.

Separate needs from wants. We recommend making three lists: must-haves, nice-to-haves, and dream items. When bids come in higher than expected (and they often do), you'll already know where to flex.

Understand Chicagoland cost ranges. Costs vary widely based on your building, your finishes, and whether you're moving plumbing or electrical. As a general planning framework in our market:

  • Cosmetic bathroom refresh (new vanity, fixtures, tile, paint, same layout): lower end of the spectrum
  • Full bathroom remodel (new layout, shower pan, waterproofing, electrical updates): mid-range
  • Luxury or accessible bathroom build (curbless entry, custom glass, heated floors, steam, niche tile work): upper range
  • Full unit gut renovation: significantly more, and timeline-intensive

Build in a contingency. We tell every client the same thing: set aside 10–20% of your budget for the unexpected. In older Chicago buildings, "unexpected" is almost guaranteed. Open a wall in a 1920s Rogers Park six-flat and you may find galvanized supply lines, cast iron drain stacks on their last legs, knob-and-tube wiring, or plaster over wood lath that doesn't want to cooperate. None of these are disasters—but they cost money and time.

Know the hidden costs. Budget for permits, architectural drawings if required, building deposits, elevator reservation fees, dumpster permits, temporary housing if you're displaced, and storage for your furniture.

Step 2: Review Your Building's Rules Before Anything Else

This step trips up more Chicagoland homeowners than any other. If you live in a condo association or co-op, your building has its own rulebook—and it often matters more than the city code.

Request your building's alteration agreement or renovation policy. Ask your property manager or board for the current version. Don't rely on a neighbor's copy from three years ago; rules change.

Here's what you're looking for:

  • Work hours. Most Chicago high-rises restrict construction to weekdays, often 9 a.m. to 5 p.m., with no weekend or holiday work. Some suburban associations are more flexible. This directly affects your timeline.
  • Noise and demolition windows. Some buildings limit jackhammering or core drilling to specific hours or days.
  • Elevator reservations. In high-rises, you'll typically need to reserve the freight elevator in advance, sometimes with a fee and padding requirements. Limited elevator access can add days to a project.
  • Insurance requirements. Nearly every association requires your contractor to carry general liability and workers' compensation, and to name the association as an additional insured on the certificate of insurance. Minimum coverage amounts vary.
  • Deposits. Many buildings require a refundable damage deposit, sometimes several thousand dollars.
  • Flooring and soundproofing requirements. This is a big one in Chicago high-rises. Many associations require a minimum IIC/STC rating for underlayment if you're installing hard surface flooring. Some prohibit hard flooring entirely outside of kitchens and baths.
  • Plumbing and riser restrictions. Moving a toilet or relocating a wet wall may be prohibited or require engineering review, especially if it means touching a shared stack.
  • Water shut-off protocols. Shutting down a riser usually requires advance notice to the building and to neighbors.
  • Approved contractor lists. Some buildings maintain a pre-approved vendor list or require board interviews.

Co-ops have an extra layer. Chicago has fewer co-ops than New York, but they exist—particularly in Hyde Park, Lakeview, and along the North Shore. Co-op boards typically have more authority over alterations than condo boards and may require formal alteration agreements, architect sign-off, and board approval before any work begins.

Single-family and townhome owners: You may still have an HOA with exterior restrictions, and in historic districts, you may face additional review. More on that below.

Step 3: Hire the Right Professionals

Who you need depends on scope.

A licensed contractor is essential for virtually any renovation involving plumbing, electrical, or structural work. In Chicago, verify your contractor holds a current City of Chicago General Contractor license. In suburban municipalities, check local registration requirements—many villages require contractors to register annually and post a bond.

A designer helps if you're unsure about layout, materials, or how to make a small space function better. Many remodeling firms, including ours, handle design in-house, which keeps the vision and the execution under one roof.

An architect or structural engineer is required when you're moving load-bearing walls, altering structural elements, or when your building or municipality demands stamped drawings. Chicago requires architect- or engineer-sealed plans for many permit applications.

Licensed plumbers and electricians. In Illinois, plumbing must be performed by a licensed plumber. Your general contractor should bring licensed trades—ask to see their licenses, not just your GC's.

What to verify before signing:

  • Current license and municipal registration
  • General liability insurance and workers' compensation certificates
  • References from projects in similar buildings
  • Written, itemized proposal—not a one-line number
  • A clear payment schedule tied to milestones, not a large upfront deposit
  • Lien waivers at each payment (critical in Illinois, where the Mechanics Lien Act is strict)

Get at least three bids, and compare them line by line. If one bid is dramatically lower, find out what's missing. Often it's waterproofing, permits, or a realistic allowance for tile and fixtures.

Step 4: Determine Your Permit Requirements

Permit rules vary significantly across Chicagoland, so this step is location-specific.

In the City of Chicago, you'll generally need a permit for:

  • Relocating or adding plumbing fixtures
  • New or modified electrical circuits
  • Removing or altering walls
  • Structural changes
  • HVAC modifications
  • Window or door openings

Chicago offers an Easy Permit Process for smaller-scope repair and replacement work that doesn't involve structural or major system changes—this is handled over the counter and is faster and cheaper. Larger projects go through the standard permit review, which requires plans and takes longer.

Work that typically does not require a permit in Chicago includes painting, wallpapering, cabinet refacing, flooring replacement, and swapping a fixture in the exact same location. Even so, your condo board may still require notification.

In the suburbs, each municipality sets its own rules. Evanston, Naperville, Arlington Heights, Oak Park, Schaumburg, Wilmette, and Elmhurst all run their own building departments with their own fee schedules, inspection requirements, and turnaround times. Some require a plat of survey for exterior work. Some require a licensed plumber to pull the plumbing permit directly.

Historic districts add review. If your property sits in a Chicago Landmark district—Old Town Triangle, Pullman, Jackson Park Highlands, Logan Square Boulevards—or a local suburban historic district like those in Oak Park, Evanston, or Riverside, exterior changes may require review by a landmarks or preservation commission. Interior work is usually exempt, but confirm before you assume.

Don't skip the permit. Unpermitted work can surface during resale, trigger stop-work orders, void insurance claims, and create real problems with your condo association. The cost of a permit is minor compared to the cost of retroactive compliance.

Step 5: Secure Your Approvals

With your scope, plans, and team in place, it's time to get everyone's blessing.

Building/HOA approval typically comes first. Submit your renovation application package, which usually includes:

  • A description of the work
  • Drawings or plans
  • Contractor license and insurance certificates
  • Proposed schedule
  • Deposit payment

Board review timelines vary from a few days to several weeks, depending on whether your board meets monthly. Build this into your schedule—don't assume same-week turnaround.

Permit approval follows. Your contractor or architect typically pulls the permit. Chicago's standard review can take several weeks for plan-review projects; Easy Permits are same-day. Suburban timelines range from a few days to a month.

Notify your neighbors. Not required, but smart. A short note letting the units above, below, and beside you know your dates and your contractor's contact information prevents a lot of friction. In tight Chicago buildings, goodwill is worth more than you'd think.

Step 6: Prepare for Construction

The prep phase determines how smoothly demo week goes.

Finalize all selections before work begins. Tile, grout color, vanity, faucets, shower valve trim, lighting, mirrors, hardware, paint. Ordering mid-project is the single most common cause of delays. Plumbing rough-in depends on knowing exactly which valve and fixtures you've chosen—a substitution after the walls are closed means reopening them.

Account for lead times. Custom vanities, imported tile, and specialty glass can run 6–12 weeks. Order early and store materials if your building allows it.

Plan your living situation. A single-bathroom condo remodel means you're without a bathroom for the duration—typically 3–6 weeks for a standard full remodel. Decide now whether you'll stay with family, rent short-term, or arrange something else. A kitchen remodel means a temporary kitchen setup: microwave, hot plate, mini fridge, and a lot of takeout.

Protect everything else. Your contractor should install floor protection along the path from the elevator or entry to the work area, hang dust barriers with zipper access, and set up negative air or containment where needed. Chicago construction dust travels—especially in forced-air buildings. Make sure HVAC returns in the work zone are sealed.

Move out what matters. Clear the work area completely and relocate anything fragile or valuable from adjacent rooms. Vibration from demo travels further than you'd expect.

Confirm logistics. Elevator reservation, parking for the crew (a real consideration in Lakeview, Wicker Park, and Lincoln Square), dumpster placement and any required street permits, building access and key or fob arrangements, and a clear point of contact with your property manager.

Think about the season. Chicago winters affect scheduling. Deliveries get delayed in snow, street parking vanishes after plowing, and some buildings restrict exterior work entirely between November and March. Tile and mortar also need stable temperatures to cure properly—if your building's heat is unreliable, plan accordingly.

Step 7: Manage the Work Through Completion

Once construction starts, your job shifts from decision-maker to project partner.

Establish a communication rhythm. We recommend a weekly check-in—in person or by phone—plus a shared channel for quick questions. You should always know what's happening this week and what's coming next.

Expect the discovery phase. The first few days after demolition are when surprises appear. Rotted subfloor under an old tub. A drain line that's not where the plans said. Wiring that doesn't meet current code. Your contractor should document findings with photos, explain the options, and provide written change orders with costs before proceeding. Never approve a change verbally.

Understand the typical sequence of a bathroom remodel:

  1. Demolition and debris removal
  2. Rough plumbing and electrical
  3. Framing adjustments
  4. Rough inspections (if permitted)
  5. Insulation and drywall or cement board
  6. Waterproofing of the shower or tub area
  7. Tile installation
  8. Grouting and sealing
  9. Vanity, fixture, and trim installation
  10. Glass measurement and installation (usually after tile—adds 1–2 weeks)
  11. Paint and final touches
  12. Final inspection and punch list

Don't rush the waterproofing. This is the single most important step in any bathroom and the one most often compromised to save money. A properly waterproofed shower assembly—whether sheet membrane, liquid-applied, or a bonded system—is what protects your unit and the unit below for the next 20 years. In a condo, a shower leak isn't just your problem; it's a liability claim.

Walk the project at key milestones. Before drywall goes up, verify blocking locations for grab bars, shower benches, and towel bars. Confirm outlet and switch placement. It's easy to change now and expensive to change later.

Handle the punch list properly. At substantial completion, walk the entire space with your contractor and document every item: a caulk line that needs redoing, a cabinet door out of alignment, a touch-up spot. Get it in writing with a completion date. Hold the final payment until the list is closed out.

Collect your documentation. Final inspection approval, warranty information for all fixtures and materials, lien waivers from the GC and all subcontractors, and a record of your permits. Keep these with your property records—you'll want them at resale.

Close out with your building. Notify your property manager that work is complete, request your deposit refund, and confirm there's no outstanding damage claim.

A Few Chicagoland-Specific Realities Worth Knowing

Vintage buildings have vintage plumbing. If your building predates 1960, assume you may encounter galvanized supply piping. It corrodes from the inside and restricts flow. If you're already opening the wall, replacing it with copper or PEX is almost always worth the incremental cost.

Cast iron stacks are common and heavy. Many Chicago buildings still run original cast iron drain stacks. Tying into them requires specific technique and the right couplings. Make sure your plumber has done it before.

Hard water is a factor. Much of Chicagoland runs hard water. It shortens the life of fixtures and leaves scale on glass and tile. Consider finishes that hide spotting and talk to your contractor about whether a softener or filtration system makes sense.

Radiator heat complicates bathroom layouts. Many vintage units have steam or hot water radiators in the bathroom. Relocating or replacing them with a low-profile or towel-warmer alternative is possible but requires planning and often a specialist.

Soundproofing pays off. If you're already opening walls in a condo, adding mineral wool insulation or resilient channel is a small cost that meaningfully improves daily life in a shared building.

Working With Century City Baths

We built our process around the reality that most Chicagoland renovations happen in buildings with rules, neighbors, and histories. Our team handles design, permitting, building coordination, and construction under one roof—so you're not the one chasing a certificate of insurance or sitting on hold with a property manager.

Every project starts with an in-home consultation where we assess your space, discuss your goals and budget, and give you an honest read on scope and timeline. From there, you get a detailed written proposal with no vague allowances, a clear schedule, and a single point of contact from demo to punch list.

If you're thinking about a bathroom remodel, an accessibility conversion, or a full unit renovation anywhere in Chicago or the surrounding suburbs, we'd be glad to talk through your project.

Schedule your consultation with Century City Baths today—and let's build something you'll love coming home to.

Get Your Free Estimate

Free Bathroom Remodeling Estimates - call (309) 487-2105
HomeAdvisor Ratings and Reviews - 4.7 overall rating